Version: 2.0.0

Upgrade Guide

Upgrading from 1.x.x to 2.0.0: Key Changes and Considerations#

This document outlines the major updates, configuration compatibility changes, API behavior differences, and critical considerations when upgrading the APISIX Ingress Controller from version 1.x.x to 2.0.0. Please read carefully and assess the impact on your existing system before proceeding with the upgrade.

APISIX Version Dependency (Data Plane)#

The apisix-standalone mode is supported only with APISIX 3.13.0. When using this mode, it is mandatory to upgrade the data plane APISIX instance along with the Ingress Controller.

Architecture Changes#

Architecture in 1.x.x#

There were two main deployment architectures in 1.x.x:

Mode	Description	Issue
Admin API Mode	Runs a separate etcd instance, with APISIX Admin API managing data plane configuration	Complex to deploy; high maintenance overhead for etcd
Mock-ETCD Mode	APISIX and the Ingress Controller are deployed in the same Pod, mocking etcd endpoints	Stateless Ingress cannot persist revision info; may lead to data inconsistency

Architecture in 2.0.0#

Mock-ETCD Mode Deprecated#

The mock-etcd architecture is no longer supported. This mode introduced significant reliability issues: stateless ingress controllers could not persist revision metadata, leading to memory pollution in the data plane and data inconsistencies.

The following configuration block has been removed:

etcdserver:
  enabled: false
  listen_address: ":12379"
  prefix: /apisix
  ssl_key_encrypt_salt: edd1c9f0985e76a2

Controller-Only Configuration Source#

In 2.0.0, all data plane configurations must originate from the Ingress Controller. Configurations via Admin API or any external methods are no longer supported and will be ignored or may cause errors.

APISIX With Etcd (Admin API) synchronization performance#

In APISIX Ingress Controller 2.0.0, ADC performs scheduled resource synchronization by comparing resources against the admin API response.

Because the Admin API fills in default values, the submitted content may differ from the returned result. This breaks the diff, triggering full updates to data plane resources, causing cache invalidation and significant performance impact.

Ingress Configuration Changes#

Configuration Path Changes#

Old Path	New Path
`kubernetes.election_id`	`leader_election_id`

Removed Configuration Fields#

Configuration Path	Description
`kubernetes.*`	Multi-namespace control / sync interval
`plugin_metadata_cm`	Plugin metadata ConfigMap
`log_rotation_*`	Log rotation settings
`apisix.*`	Static Admin API configuration
`etcdserver.*`	Configuration for mock-etcd (deprecated)

Example: Legacy Configuration Removed in 2.0.0#

apisix:
  admin_api_version: v3
  default_cluster_base_url: "http://127.0.0.1:9180/apisix/admin"
  default_cluster_admin_key: ""
  default_cluster_name: "default"

New Configuration via `GatewayProxy` CRD#

From version 2.0.0, the data plane must be connected via the GatewayProxy CRD:

apiVersion: networking.k8s.io/v1
kind: IngressClass
metadata:
  name: apisix
spec:
  controller: "apisix.apache.org/apisix-ingress-controller"
  parameters:
    apiGroup: "apisix.apache.org"
    kind: "GatewayProxy"
    name: "apisix-proxy-config"
    namespace: "default"
    scope: "Namespace"
---
apiVersion: apisix.apache.org/v1alpha1
kind: GatewayProxy
metadata:
  name: apisix-proxy-config
  namespace: default
spec:
  provider:
    type: ControlPlane
    controlPlane:
      endpoints:
      - https://127.0.0.1:9180
      auth:
        type: AdminKey
        adminKey:
          value: ""

API Changes#

`ApisixUpstream`#

Due to current limitations in the ADC (API Definition Controller) component, the following fields are not yet supported:

spec.discovery: Service Discovery
spec.healthCheck: Health Checking

More details: ADC Backend Differences

`ApisixClusterConfig`#

The ApisixClusterConfig CRD has been removed in 2.0.0. global rules and configurations should now be managed through the ApisixGlobalRule CRDs.

Ingress#

API Version Support#

Currently supports networking.k8s.io/v1 only. Support for other Ingress API versions (networking.k8s.io/v1beta1 and extensions/v1beta1) is not yet available in 2.0.0.

Limited Support for Ingress Annotations#

Ingress annotations used in version 1.x.x are not fully supported in 2.0.0. If your existing setup relies on any of the following annotations, validate compatibility or consider delaying the upgrade.

Ingress Annotations
`k8s.apisix.apache.org/use-regex`
`k8s.apisix.apache.org/enable-websocket`
`k8s.apisix.apache.org/plugin-config-name`
`k8s.apisix.apache.org/upstream-scheme`
`k8s.apisix.apache.org/upstream-retries`
`k8s.apisix.apache.org/upstream-connect-timeout`
`k8s.apisix.apache.org/upstream-read-timeout`
`k8s.apisix.apache.org/upstream-send-timeout`
`k8s.apisix.apache.org/enable-cors`
`k8s.apisix.apache.org/cors-allow-origin`
`k8s.apisix.apache.org/cors-allow-headers`
`k8s.apisix.apache.org/cors-allow-methods`
`k8s.apisix.apache.org/enable-csrf`
`k8s.apisix.apache.org/csrf-key`
`k8s.apisix.apache.org/http-to-https`
`k8s.apisix.apache.org/http-redirect`
`k8s.apisix.apache.org/http-redirect-code`
`k8s.apisix.apache.org/rewrite-target`
`k8s.apisix.apache.org/rewrite-target-regex`
`k8s.apisix.apache.org/rewrite-target-regex-template`
`k8s.apisix.apache.org/enable-response-rewrite`
`k8s.apisix.apache.org/response-rewrite-status-code`
`k8s.apisix.apache.org/response-rewrite-body`
`k8s.apisix.apache.org/response-rewrite-body-base64`
`k8s.apisix.apache.org/response-rewrite-add-header`
`k8s.apisix.apache.org/response-rewrite-set-header`
`k8s.apisix.apache.org/response-rewrite-remove-header`
`k8s.apisix.apache.org/auth-uri`
`k8s.apisix.apache.org/auth-ssl-verify`
`k8s.apisix.apache.org/auth-request-headers`
`k8s.apisix.apache.org/auth-upstream-headers`
`k8s.apisix.apache.org/auth-client-headers`
`k8s.apisix.apache.org/allowlist-source-range`
`k8s.apisix.apache.org/blocklist-source-range`
`k8s.apisix.apache.org/http-allow-methods`
`k8s.apisix.apache.org/http-block-methods`
`k8s.apisix.apache.org/auth-type`
`k8s.apisix.apache.org/svc-namespace`

Summary#

Category	Description
Architecture	The `mock-etcd` component has been removed. Configuration is now centralized through the Controller.
Configuration	Static configuration fields have been removed. Use `GatewayProxy` CRD to configure the data plane.
Data Plane	Requires APISIX version 3.13.0 running in `standalone` mode.
API	Some fields in `Ingress Annotations` and `ApisixUpstream` are not yet supported.
Upgrade Strategy	Blue-green deployment or canary release is recommended before full switchover.